Wood carving handicrafts have a good quality of light can not be directly produced, any wood needs to go through a few special water treatment, in order to ensure that the production of handicrafts as ever. However, due to the complexity of the process of dehydration and the time consuming manual labor, some wood carving producers usually omit these processes. The handicraft made of wood containing a lot of moisture is likely to be deformed, moldy, cracked or even grow "small mushrooms."
We are manufacturing and supplying a wide
array of Waffle Cotton Hotel Slipper both in close toe and open toe These
slippers are manufactured using optimum quality raw material
and advance technology and can be availed in various designs and colors.Our
entire range of Hotel Bath Slippers is comfortable, convenient and can
withstand any kind of climate. Further, in order to attain maximum customer
satisfaction, we offer customization facility with our entire product range.
Cotton Slippers,Waffle Slipper,Open Toe Waffle Slipper,Close Toe Waffle Slipper Yangzhou Lansun Slipper Co.,Ltd , https://www.lansunslipper.com
Paint is also a very important process. Evenly distributed paint not only protects the product, but also makes the product look very beautiful. The quality of the paint depends on the quality of the paint and the process of painting. Good paint is not only environmentally friendly, but also penetrates into the surface of the wood and provides adequate protection. Low-quality paint or rough craftsmanship cannot penetrate into the surface of the wood, but also leave bubbles on the surface of the wood. Intuitively, the colors appear uneven, with a deep shade, and paint may be removed in a short time. Inferior paint not only affects the aesthetics of the entire work, but it is even less protective.
The production process of wood carving crafts is divided into:
1, hit the billet, initially determine the profile of the wooden sculpture figure, play rough, from top to bottom, from front to back, from the table and in, from shallow to deep, layered to open. When you hit the billet, you need to pay attention to leave room for it, and stay a little bigger. As the saying goes: “Retaining a big mast can make it small, but it's hard to compound fertilizer, and the inner distance should not be too big. To do wood carving is to do a subtraction. To play a rough bill: firstly, consider the overall situation, adjust the ratio and layout, Then the specific form is gradually implemented and shaped, leaving room for repairing light.
2, repair light, repair light is a fine work, through the repair of light to show the character lively and flexible now.
3, polishing, so the meaning of the Ming is to polish the wood carving, with different types of sandpaper along the grain of wood carving wood has been polished to the desired effect.
4, packaging, storage, storage. If you want to know more details, please contact the chisel technical staff of Redwood Art Woodwork.