Light Weight Plaid Fabric,Lightweight Plaid Fabric,Plaid Fashion Fabric,Thin Plaid Fabric Jiangyin Yaze Wool Textile Co. LTD , https://www.ya-ze.com
3 easy to fade
China Towel Industry Network Xiaobian reminds everyone: we must choose carefully to buy towels. A towel that depends on it every day must also be fully covered, otherwise there will be many problems.
The texture is slack, inelastic, and the feel is slippery; the towel just bought does not absorb water at all! ! Wash your face and rub it several times over and over again.
The towel will fade when it is watered. Hair loss! The face is full of hair; the towel is thin and light, and there is no feeling at all.
The quality is too bad, it took only a week to break the hole.
How are these problems caused? How should I choose a good towel? Please see the next introduction to the China Towel Industry Network.
1 texture is slack, inelastic, feels slippery
Mainly determined by the material. If you choose a towel containing chemical fiber, it will feel slack and slippery when used, and if you choose a high-quality natural fiber towel, it will be comfortable to use. Natural fiber is divided into five categories: cotton, hemp, silk, wool and bamboo fiber. The good towel material is mainly cotton and bamboo fiber.
Pure cotton, it is a natural cotton fiber, fluffy texture, soft to the touch, moisture absorption and breathability. The main ingredient is cellulose. Pure cotton products are in contact with the skin without irritation and have good hygienic performance.
Bamboo fiber, which is a fiber extracted from naturally grown bamboo. Bamboo fiber has good gas permeability, instant water absorption, strong abrasion resistance and good dyeability, in addition to natural antibacterial, antibacterial, and螨, deodorant and UV resistant.
2 poor water absorption
This is also due to material reasons. Towels made of chemical fiber materials such as polyester and nylon are generally poor in water absorption; while natural fiber towels have good water absorption. Try to use a natural fiber towel.
Have you ever thought about why towels will absorb water? This principle is a capillary phenomenon, in which the capillary is inserted into the immersion liquid, and the liquid level in the tube rises above the tube. The catheter in the stem of a plant is a very fine capillary in the plant that sucks up the water in the soil. Brick water absorption and chalk ink absorption are common capillary phenomena.
This phenomenon is mainly caused by inferior dyes. Towels with poor color fastness, the dye will be transferred to the skin and cause harm to the human body. The production process also brings harm to the environment. The most important thing is that it will not make a face.
4 hair loss is serious
The severity of lint is related to the production process. The cut pile is even more fragrant than the non-cut pile, because the cut pile will cut the terry of the towel to make the surface of the fabric full of flat fluff. This will look like you have the exquisite luster you like and the water absorption is stronger.
It is normal for the towel to lose hair. The existing production process cannot avoid the problem of hair loss, as long as it is within a reasonable range. The indicator for assessing the degree of hair loss in the national standard is called the hair removal rate, which refers to the percentage of the weight of the towel after washing and drying, which is the original weight. The hair loss rate of Cut Velvet towel ≤0.5% can be called superior product, first-class product ≤1.5%, qualified product ≤2.0%. Non-cut velvet towels are ≤0.4%, first-class products ≤1.0%, qualified products ≤2.0%; non-cut velvet requirements are higher than cut velvet.
5 thin and light
This is mainly related to size, related to knitting density, and also to personal preference. The larger the size, the higher the knitting density, the thicker the towel. The conventional size of the towel is 34*75cm. For household towels, the weight of this size is about 90-100g, while the hotel towel of the same size will weigh about 100-120g. When the quality towel is delivered from the factory, the weight is controlled within ±4.5% of the required weight.
6 holes
It is related to the weaving density and the thickness of the yarn. The higher the weaving density of the towel and the thicker the yarn, the stronger the towel will be and the more durable it will be. Otherwise, it will take a long time to break the hole. When making a quality inspection, the towel will be graded according to the strength that the towel can withstand. The critical strength of the towel when it is broken is called the breaking strength. The breaking strength of superior products needs to be ≥220N, first-class products, qualified products ≥180N.
In addition, the easiest and most important point when purchasing towels is to check the product logo. The quality of the products that will be used for product identification will generally not be too small. It is mainly composed of seven aspects, namely product name, implementation standard, factory name, fiber content, number specification, washing method and safety category. Among them, the safety category is divided into A (baby products), B (direct contact with skin) and C (non-direct contact with skin). The towel we use must meet at least Class B requirements.
Towels should be used exclusively for personal use and should not be used interchangeably. China Towel Industry Network Xiaobian suggested that everyone: at home, it is best to prepare three to four towels per person, wash your face, take a shower, use your hands separately, so as to ensure the healthy use of towels.