The high temperature test chamber is an essential test equipment for aviation, automotive, home appliances, scientific research, etc., used to test and determine the parameters and performance of electrical, electronic and other products and materials after high temperature or constant test temperature environment changes. With the development of time, the functions and types of high temperature test chambers have undergone great changes. From this we can see that scientists must have undergone very serious research. Because the high temperature test chamber is a kind of precision equipment, it plays an important role in the simulation of high temperature environment test. Therefore, we usually carry out careful maintenance work on the high temperature test chamber. How should the maintenance of the high temperature test chamber be carried out? FR Suits can inhibit the ignite prevent the spread of flames,keep away from the impact of high heat,and FR Suits can do almost immediately self-extinguishing after move away fire source.The other fabrics suits will be fired since the ignition point,flame spread quickly,and it is still on fire after move away the fire source, until it has been put out or flammable material is burned. FR Coveralls capable of preventing itself from being ignited or slowing and terminating combustion after contact with a flame or hot object.we produce FR Suits,FR Jackets,FR knitted t-shirt, FR Bibs are all certified. If you need Flame Retardant Fabric to meet certain FR standard, we can provide you relative FR certificate, and make sure the specific code which you received is valid. Sometimes, certified corresponding fabric may not be exactly what you need, but most important is the connection between us, and you trust us. Fr Suits,Fire Retardant Suit,Flame Retardant Suit,Fireproof Suit Xinxiang Xinke Protective Technology Co, Ltd. , https://www.coverallsuit.de
First, strictly follow the operating procedures and prescribed steps; start and stop the equipment, make careful preparation before starting, repeat inspection during start-up, properly handle after shutdown, no overpressure, no overload.
Second, the high temperature test box is clean inside and outside; all sliding surfaces, screw rods, racks, gears, etc. are free of grease and no bumps, and all parts are not leaking, no oil leakage, and the garbage is cleaned.
Third, regular maintenance of the line; check whether there are hidden dangers such as loose head, wire peeling, falling off, etc., prohibiting private assembly, processing, re-election or repair.
Fourth, the instrument is accurately calibrated every six months.
5. If an abnormality is found, the machine will be shut down immediately, and the problem that cannot be handled by itself should be promptly notified to the relevant personnel for inspection and treatment.
The maintenance work of the high temperature test chamber must be taken seriously, because only the maintenance work of the high temperature test chamber can ensure that the high temperature test chamber can work under normal conditions, and has a longer service life and prolongs the service life. The company's savings in output capital can make the company's profitability higher. Therefore, if you have not yet maintained the high temperature test chamber, then take action and as long as we are diligent, the high temperature test chamber will accompany us for a longer time.